lbaops:lbamay2005:vt03a1
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
lbaops:lbamay2005:vt03a1 [2005/05/12 21:35] stingay |
lbaops:lbamay2005:vt03a1 [2015/12/18 16:38] (current) |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ===== vt03a1 Setup:\\ ===== | + | ===== vt03a1 Setup: ===== |
| + | |||
| + | ^Antennas | ||
| + | ^Start | ||
| + | ^Stop | 133 01: | ||
| + | ^PI | Gulyaev/ | ||
| + | ^Channel 1 | 1650 - 1666 MHz USB RCP | | ||
| + | ^Channel 2 | 1650 - 1666 MHz USB LCP | | ||
| + | ^Bandwidth | ||
| + | ^Recorder | ||
| + | ^S2 Mode | N/A | | ||
| + | ^DAS Mode | [[http:// | ||
| + | ^Buggary Cable | out | | ||
| + | |||
| + | Ftp: [[ftp:// | ||
| + | ---- | ||
| + | |||
| + | ===== Comments: ===== | ||
| + | |||
| + | ATCA and Mopra telescope schedules in place | ||
| + | |||
| + | Parkes .psn schedule at ftp:// | ||
| + | |||
| + | Hobart VEX schedule at ftp:// | ||
| + | |||
| + | To set this experiment up: | ||
| + | |||
| + | 1) Connect DAS output to VSIC directly (no buggery cable), and then to recorder; | ||
| + | |||
| + | 2) Change to a new directory; | ||
| + | |||
| + | 3) Start recording: vsib_record -t 3h -s 2005-05-12T22: | ||
| + | |||
| + | ---- | ||
| + | Fringes: [[http:// | ||
| - | ^Antennas | ||
| - | ^Start | ||
| - | ^Stop | 133 01: | ||
| - | ^PI | Gulyaev/ | ||
| - | ^Channel 1 | 1650 - 1666 MHz USB RCP |\\ | ||
| - | ^Channel 2 | 1650 - 1666 MHz USB LCP |\\ | ||
| - | ^Bandwidth | ||
| - | ^Recorder | ||
| - | ^S2 Mode | N/A |\\ | ||
| - | ^DAS Mode | [[http:// | ||
| - | ^Buggary Cable | out |\\ | ||
| - | \\ | ||
| - | Ftp: [[ftp:// | ||
| - | ----\\ | ||
| - | \\ | ||
| - | ===== Comments:\\ ===== | ||
| - | \\ | ||
| - | ATCA and Mopra telescope schedules in place\\ | ||
| - | \\ | ||
| - | Parkes .psn schedule at ftp:// | ||
| - | \\ | ||
| - | Hobart VEX schedule at ftp:// | ||
| - | \\ | ||
| - | This experiment should be setup as per the normal fringe-checking proceedure (as was used for vt02d1) i.e:\ | ||
| - | \ | ||
| - | 1) Connect DAS to S2;\ | ||
| - | 2) Connect S2 to VSIC and on to disk-based recorder via BG2 cable;\ | ||
| - | 3) Use the following to record data: vsib_record -t 3h -c oxox -o < | ||
| - | 4) | ||
lbaops/lbamay2005/vt03a1.1115897734.txt.gz · Last modified: 2015/12/18 16:38 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
