Differences

This shows you the differences between two versions of the page.

--- lbaops:lbamay2006:v188amplog [2006/05/12 22:29]
stingay
+++ lbaops:lbamay2006:v188amplog [2015/12/18 16:38] (current)
@@ Line 1: / Line 1: @@
-Use "channels 1 - 8" in disko\
-\
+SETUP
-Connect DAS1 (2285 MHz centre) and DAS2 (2317 MHz) directly to VSIC1 va the Huygens cable to mpvsi1 \
-\
+Use "channels 1 - 8" in disko
-Record to the 4 partitions on the two sets of 7 x 500 GB drives mounted on mpvsi1. xraid0, xraid1, xraid2, xraid3\
+Connect DAS1 (2285 MHz centre) and DAS2 (2317 MHz) directly to VSIC1 va the Huygens cable to mpvsi1
+Record to the 4 partitions on the two sets of 7 x 500 GB drives mounted on mpvsi1. xraid0, xraid1, xraid2, xraid3
+OBSERVING LOG
+Data recorded to /data/xraid0 which is physical set "D8 - D14", first partition for first 6hrs of experiment (17:30 - 23:30 UT) and second partition /data/xraid1 for second 6hrs of experiment (23:30 - 05:30 UT).
+Mopra Rx had to be recabled to give RCP, LCP (change had been made in RF module).
+Mopra Log Tsys order: F1: LCP, RCP then F2: LCP, RCP

ATNF VLBI Wiki