User Tools

Site Tools


lbaops:lbamay2006:v188atilog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:lbamay2006:v188atilog [2006/05/13 08:07]
jlovell
lbaops:lbamay2006:v188atilog [2015/12/18 16:38] (current)
Line 1: Line 1:
-Use "​channels 1 - 4" in disko\\\\\ +====== http://​www.atnf.csiro.au/​observers/​docs/​tid_obs_guide/​dss43_above.jpg Tidbinbilla log ====== 
-\\\\\ + 
-Connect DAS (2285 MHz centre) directly to VSIC to recorder\\\\\ +Use "​channels 1 - 4" in disko 
-\\\\\ + 
-Record to 4 x 400 GB removable drives\\\\\ +Connect DAS (2285 MHz centre) directly to VSIC to recorder 
-\\\\\ + 
-  *  [[.:​v188atidnotes|Tid setup notes]]\\\\\ +Record to 4 x 400 GB removable drives 
-----\\\\\ + 
-=====  Observing notes\\\\\ ===== +  *  [[.:​v188atidnotes|Tid setup notes]] 
-\\\\\ +---- 
-  *  Late in starting due to maintenance on a file server prior to the track taking longer than expected.\\\\\ +=====  Observing notes ===== 
-  *  On point and recording at 21:18:46 UT. Fringes found, so should be good data from the start.\\\\\ + 
-  *  DCC1 is logging Tsys for LCP, DCC2 for RCP. DCC2 was misbehaving and required a reboot to fix it, so Tsys logging for RCP started late, around 21:55 UT\\\\\ +  *  Late in starting due to maintenance on a file server prior to the track taking longer than expected. 
-\\+  *  On point and recording at 21:18:46 UT. Fringes found, so should be good data from the start. 
 +  *  DCC1 is logging Tsys for LCP, DCC2 for RCP. DCC2 was misbehaving and required a reboot to fix it, so Tsys logging for RCP started late, around 21:55 UT 
 +  ​* ​ 23:41:36 Sending antenna back to J0038-24 early as it's a long ~10min slew and the schedule only allows ~1 min! 
 +  *  23:52:38 Back on J0038 now 
 +  *  Last good data at 04:20:12, moving to stow. 
 + 
 + 
  
  
lbaops/lbamay2006/v188atilog.1147471636.txt.gz · Last modified: 2015/12/18 16:38 (external edit)