User Tools

Site Tools


lbaops:lbamay2006:v190cholog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
lbaops:lbamay2006:v190cholog [2006/08/23 15:44]
breid
lbaops:lbamay2006:v190cholog [2006/08/23 15:48]
breid
Line 1: Line 1:
-using Xraid disks labelled "Ho001 A1-7 (Slice A)"\\+using Xraid disks labelled "Ho001 A1-7 (Slice A)"\ 
-\\+
-observers: Giuseppe Cimo, Brett Reid, Jamie Stevens\\+observers: Giuseppe Cimo, Brett Reid, Jamie Stevens\ 
-weather: moderate west breeze. 50% cloud cover\\+weather: moderate west breeze. 50% cloud cover\ 
-center sky frequency is 1666 MHz\\+center sky frequency is 1666 MHz\ 
-\\+
-Agilent 1st LO is 4.1 GHz\\+Agilent 1st LO is 4.1 GHz\ 
-IF to control room is 566 center\\+IF to control room is 566 center\ 
-LCP only.\\+LCP only.\ 
-Injected LCP test tone is 20 dB larger in LCP than RCP at 1666 MHz. other \\+Injected LCP test tone is 20 dB larger in LCP than RCP at 1666 MHz. other \ 
-frequencies not as good.\\+frequencies not as good.\ 
-LCP IF splits and mixed with 2 different 2nd LOs of 602 and 570 MHz.\\+LCP IF splits and mixed with 2 different 2nd LOs of 602 and 570 MHz.\ 
-DAS profile is VSOP_HO\\+DAS profile is VSOP_HO\ 
-1639 sky tone produces 5 MHz coherence tone in 1st channel\\+1639 sky tone produces 5 MHz coherence tone in 1st channel\ 
-1671 sky tone produces 5 MHz coherence tone in 2nd frequency\\+1671 sky tone produces 5 MHz coherence tone in 2nd frequency\ 
-\\+
-There are one or 2 loud birdies in the pass bands.\\+There are one or 2 loud birdies in the pass bands.\ 
-\\+
-First 1 minute and 50 seconds of experiment missed while slewing after we forgot to enter tape label\ +First 1 minute and 50 seconds of experiment missed while slewing after we forgot to enter tape label.
-Schedule was restarted a few minutes in to the schedule in order to run a correct snap file with recorder = "​none"​ instead of "​S2"​\ +Schedule was restarted a few minutes in to the schedule in order to run a correct snap file with recorder = "​none"​ instead of "​S2"​.\ 
-Tsys values will be scaled later to produce the correct antab table.\\+
-\\+Tsys values will be scaled later to produce the correct antab table.\ 
-FS was complaining of no synch so we made an experiment specific "​midob"​ procedure which is the same as the generic station midob procedure but with the following line removed:\\+
-sy=run setcl adapt &\\\+FS was complaining of no synch so we made an experiment specific "​midob"​ procedure which is the same as the generic station midob procedure but with the following line removed:\ 
 +sy=run setcl adapt &\ 
 +\
 Synch errors went away after this.\ Synch errors went away after this.\
  
  
lbaops/lbamay2006/v190cholog.txt · Last modified: 2015/12/18 16:38 (external edit)