lbaops:lbamay2006:v190cholog
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
lbaops:lbamay2006:v190cholog [2006/08/23 15:46] breid |
lbaops:lbamay2006:v190cholog [2006/08/23 15:48] breid |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | using Xraid disks labelled "Ho001 A1-7 (Slice A)"\\ | + | using Xraid disks labelled "Ho001 A1-7 (Slice A)"\ |
| - | \\ | + | \ |
| - | observers: Giuseppe Cimo, Brett Reid, Jamie Stevens\\ | + | observers: Giuseppe Cimo, Brett Reid, Jamie Stevens\ |
| - | weather: moderate west breeze. 50% cloud cover\\ | + | weather: moderate west breeze. 50% cloud cover\ |
| - | center sky frequency is 1666 MHz\\ | + | center sky frequency is 1666 MHz\ |
| - | \\ | + | \ |
| - | Agilent 1st LO is 4.1 GHz\\ | + | Agilent 1st LO is 4.1 GHz\ |
| - | IF to control room is 566 center\\ | + | IF to control room is 566 center\ |
| - | LCP only.\\ | + | LCP only.\ |
| - | Injected LCP test tone is 20 dB larger in LCP than RCP at 1666 MHz. other \\ | + | Injected LCP test tone is 20 dB larger in LCP than RCP at 1666 MHz. other \ |
| - | frequencies not as good.\\ | + | frequencies not as good.\ |
| - | LCP IF splits and mixed with 2 different 2nd LOs of 602 and 570 MHz.\\ | + | LCP IF splits and mixed with 2 different 2nd LOs of 602 and 570 MHz.\ |
| - | DAS profile is VSOP_HO\\ | + | DAS profile is VSOP_HO\ |
| - | 1639 sky tone produces 5 MHz coherence tone in 1st channel\\ | + | 1639 sky tone produces 5 MHz coherence tone in 1st channel\ |
| - | 1671 sky tone produces 5 MHz coherence tone in 2nd frequency\\ | + | 1671 sky tone produces 5 MHz coherence tone in 2nd frequency\ |
| - | \\ | + | \ |
| - | There are one or 2 loud birdies in the pass bands.\\ | + | There are one or 2 loud birdies in the pass bands.\ |
| - | \\ | + | \ |
| - | First 1 minute and 50 seconds of experiment missed while slewing after we forgot to enter tape label.\\ | + | First 1 minute and 50 seconds of experiment missed while slewing after we forgot to enter tape label.\ |
| - | Schedule was restarted a few minutes in to the schedule in order to run a correct snap file with recorder = "none" instead of "S2".\\ | + | Schedule was restarted a few minutes in to the schedule in order to run a correct snap file with recorder = "none" instead of "S2".\ |
| - | \\ | + | \ |
| - | Tsys values will be scaled later to produce the correct antab table.\\ | + | Tsys values will be scaled later to produce the correct antab table.\ |
| - | \\ | + | \ |
| - | FS was complaining of no synch so we made an experiment specific "midob" procedure which is the same as the generic station midob procedure but with the following line removed:\\ | + | FS was complaining of no synch so we made an experiment specific "midob" procedure which is the same as the generic station midob procedure but with the following line removed:\ |
| - | sy=run setcl adapt &\\ | + | sy=run setcl adapt &\ |
| - | Synch errors went away after this.\\ | + | \ |
| + | Synch errors went away after this.\ | ||
lbaops/lbamay2006/v190cholog.txt · Last modified: 2015/12/18 16:38 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
