Sidebar
lbaops:lbamay2006:vt07b1
Table of Contents
vt07b1 Setup:
| Description | Gigabit fringe test |
|---|---|
| Antennas | At-Mp-Pa-Ho-Cd |
| Start | 135 09:00 |
| Stop | 135 11:00:00 |
| PI | Chris Phillips |
| Channel 1 | DAS1-IFP#1 8393-8457 MHz USB RCP |
| Channel 2 | DAS1-IFP#2 8393-8457 MHz USB LCP |
| Channel 3 | DAS2-IFP#1 8457-8521 MHz USB RCP |
| Channel 4 | DAS2-IFP#2 8457-8521 MHz USB LCP |
| Skyfreq | 8425, 8489 MHz |
| Bandwidth | 64 MHz |
| Recorder | Disk |
| DAS Mode | 64MHz_[fn].pro |
Ftp: ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt07/vt07b1
Comments:
Connect DAS to VCIC directly using the BG3 cable
This is a disk based experiment. Do NOT delete the data after recording!!!!
Start recording with a scheduled start on a 10 second boundary
Record on /data/removable or /data/xraid as appropriate
The BG3 cable connects to the 2 correlator output ports on the DAS and the S2 output port. ATCA, Parkes and Mopra will record using 2 DAS each connected to a recorder. Record onto the removable disks on *vsi2. Hobart and Ceduna should setup as for DAS1 above.
Record using disko with an bandwidth of 64 MHz. Hobart and Ceduna should use ~vlbi/cdisko-64.pl
Observing comments for each antenna:
lbaops/lbamay2006/vt07b1.txt · Last modified: 2015/12/18 16:38 by 127.0.0.1
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
