Sidebar
v181b Setup:
| Antennas | At-Mp-Pa-Ho-Cd |
|---|---|
| Start | 307 09:00:00 |
| Stop | 307 20:59:00 |
| PI | Emil Lenc |
| Channel 1 | 2252 - 2268 MHz USB RCP |
| Channel 2 | 2268 - 2284 MHz USB RCP |
| Bandwidth | 16 MHz |
| Recorder | S2 |
| DAS Mode | vsop.pro |
| S2 Mode | 32×4-2 |
| Buggary Cable | out |
| Tape Change | 307 14:58:00 |
Ftp: ftp://ftp.atnf.csiro.au/pub/people/vlbi/v181/v181a
Comments:
ATCA and Mopra observing schedules are on the relevant machines. The schedule name is v181a.
Parkes .psn file is on the ftp site.
The vex file for Hobart and Ceduna is on the ftp site.
PCFS schedules are on v1ca, v1mop and v1pks.
Run the disk-based recorders from the S2 output for the following time range: 14:30:00 - 15:30:00, using the command:
vsib_record -t 1h -s 2005-11-03T14:30:00 -c ooxx -o v181a_<An>, where <An> is one of At, Pa, Mp, Ho, Cd.
IMPORTANT!!! The vsib_record command should be made from a directory v181a_comparison/ on the internal disks, and any previous vsib_record's that are running from fringe checking should be stopped before 14:30:00, as should any instances of diskclean.pl
