User Tools

Site Tools


lbaops:lbanov2005:v181a

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

lbaops:lbanov2005:v181a [2005/10/21 13:19]
stingay
lbaops:lbanov2005:v181a [2015/12/18 16:38]
Line 1: Line 1:
-===== v181b Setup:\\ ===== 
- 
-^Antennas ​          | At-Mp-Pa-Ho-Cd |\\ 
-^Start ​             | 307 09:​00:​00 ​  |\\ 
-^Stop               | 307 20:​59:​00 ​  |\\ 
-^PI                 | Emil Lenc      |\\ 
-^Channel 1          | 2252 - 2268 MHz USB RCP  |\\ 
-^Channel 2          | 2268 - 2284 MHz USB RCP  |\\ 
-^Bandwidth ​         | 16 MHz         |\\ 
-^Recorder ​          | S2             |\\ 
-^DAS Mode           | [[http://​www.atnf.csiro.au/​vlbi/​dasmodes/​16-2IF-1p-b.html|vsop.pro]] |\\ 
-^S2 Mode            | 32x4-2 ​        |\\ 
-^Buggary Cable      | out             |\\ 
-^Tape Change ​       | 307 14:​58:​00 ​  |\\ 
-\\ 
-Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​v181/​v181a]]\\ 
-----\\ 
-\\ 
-===== Comments:\\ ===== 
-\\ 
-ATCA and Mopra observing schedules are on the relevant machines. The schedule name is vt181a.\ 
-\ 
-Parkes .psn file is on the ftp site.\\ 
-\\ 
-The vex file for Hobart and Ceduna is on the ftp site.\\ 
-\\ 
-PCFS schedules are on v1ca, v1mop and v1pks.\\ 
-\\ 
-Run the disk-based recorders from the S2 output for the following time range: 14:30:00 - 15:30:00, using the command:\\ 
-\\ 
-vsib_record -t 1h -s 2005-11-03T14:​30:​00 -c ooxx -o v181a_<​An>,​ where <An> is one of At, Pa, Mp, Ho, Cd.\\ 
-\\ 
-IMPORTANT!!! The vsib_record command should be made from a directory v181a/ on the internal disks, and any previous vsib_record'​s that are running from fringe checking should be stopped before 14:30:00, as should any instances of diskclean.pl\\ 
-\\ 
-\\ 
-\\ 
- 
  
lbaops/lbanov2005/v181a.txt · Last modified: 2015/12/18 16:38 (external edit)