Sidebar
lbaops:lbanov2005:vt02e1
vt02e1 Setup:
| Antennas | Pa-At-Mp-Cd |
|---|---|
| Start | 304 22:00:00 |
| Stop | 306 04:00:00 |
| Channel 1 | 8417 - 8433 MHz USB RCP |
| Channel 2 | 8417 - 8433 MHz USB LCP |
| Bandwidth | 16 MHz |
| Recorder | Disk through S2 |
| DAS Mode | at16s.pro |
| S2 Mode | 32×4-2 |
| Buggary Cable | in |
Ftp: ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt02/vt02e1
Comments:
Setup and fringe check for v131ba. Please email vlbiobs when you are setup and tracking.
Source coordinates are:
16h17m49.276394s -77d17'18.46754" (J2000)
Alternatively use S2 mode 32a4-2 without buggary cable. Either edit .skd file before running drudg, or edit .prc file after running drudge
The VSIC should be connected to the S2 C2a output via the BG2 cable. vsib record should be run in a directory something like:
vsib_record -t 6h -o vt02e1-Pa -c ooxx # If using buggary cable vsib_record -t 6h -o vt02e1-Pa -c oxox # No buggary and S2 mode 32a4-2
Remember to enable “uic feedthru on” on the S2
lbaops/lbanov2005/vt02e1.txt · Last modified: 2015/12/18 16:38 by 127.0.0.1
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
