User Tools

Site Tools


lbaops:lbanov2005:vt02e1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
lbaops:lbanov2005:vt02e1 [2005/04/07 08:23]
Unknown
lbaops:lbanov2005:vt02e1 [2015/12/18 16:38] (current)
Line 1: Line 1:
-===== v131ba ​Setup:=====+===== vt02e1 ​Setup: =====
  
-^Antennas ​          | Pa-At-Mp-Ho-Cd-Hh |\ +^Antennas ​          | Pa-At-Mp-Cd | 
-^Start ​             | 305 04:​00:​00 ​  |\ +^Start ​             | 304 22:​00:​00 ​  | 
-^Stop               | 306 03:56:00   |+^Stop               | 306 04:00:00   | 
-^PI                 | Roopesh Ojha |\ +^Channel 1          | 8417 - 8433 MHz USB RCP  | 
-^Channel 1          | 8417 - 8433 MHz USB RCP  |\\\ +^Channel 2          | 8417 - 8433 MHz USB LCP  | 
-^Channel 2          | 8417 - 8433 MHz USB LCP  |\\\ +^Bandwidth ​         | 16 MHz         | 
-^Bandwidth ​         | 16 MHz         |\\\ +^Recorder ​          ​| ​Disk through ​S2 | 
-^Recorder ​          | S2             ​|\ +^DAS Mode           | [[http://​www.atnf.csiro.au/​vlbi/​dasmodes/​16-1IF-2p-a.html|at16s.pro]] | 
-^DAS Mode           | [[http://​www.atnf.csiro.au/​vlbi/​dasmodes/​16-1IF-2p-a.html|at16s.pro]] |\\\ +^S2 Mode            | 32x4-2 ​        | 
-^S2 Mode            | 32x4-2 ​        |\\\ +^Buggary Cable      | in             | 
-^Buggary Cable      | in             |\\\ + 
-^Tape Change ​       | 305 09:​56:​00 ​  |\ +Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​vt02/vt02e1]] 
-^Tape Change ​       | 305 15:​56:​00 ​  |\ +---- 
-^Tape Change ​       | 305 21:​56:​00 ​  |\ + 
-\ +===== Comments: ===== 
-Ftp: [[ftp://​ftp.atnf.csiro.au/​pub/​people/​vlbi/​v131/v131ba]]\ + 
-----\\\ +Setup and fringe check for v131ba. Please email vlbiobs when you are setup and tracking. 
-\\\ + 
-===== Comments:\\\ ===== +Source coordinates are: 
-\\\ + 
-Alternatively use S2 mode 32a4-2 without buggary cable.\\\ +   ​16h17m49.276394s -77d17'​18.46754"​ (J2000) 
-Either edit .skd file before running drudg, or edit .prc file\\\+ 
 +Alternatively use S2 mode 32a4-2 without buggary cable. 
 +Either edit .skd file before running drudg, or edit .prc file
 after running drudge after running drudge
 +
 +The VSIC should be connected to the S2 C2a output via the BG2 cable. vsib record should be run in a directory something like:
 +    vsib_record -t 6h -o vt02e1-Pa -c ooxx       # If using buggary cable
 +    vsib_record -t 6h -o vt02e1-Pa -c oxox       # No buggary and S2 mode 32a4-2
 +
 +Remember to enable "uic feedthru on" on the S2
 +
lbaops/lbanov2005/vt02e1.1112826235.txt.gz · Last modified: 2015/12/18 16:38 (external edit)