Sidebar
vt06a1 Setup:
| Antennas | At-Mp-Pa-Ho |
|---|---|
| Start | 307 22:00:00 |
| Stop | 308 01:00:00 |
| PI | Adam Deller |
| Channel 1 | 1384 - 1400 MHz DAS1 USB RCP |
| Channel 2 | 1400 - 1416 MHz DAS1 USB RCP |
| Channel 3 | 1384 - 1400 MHz DAS1 USB LCP |
| Channel 4 | 1400 - 1416 MHz DAS1 USB LCP |
| Channel 5 | 1416 - 1432 MHz DAS2 USB RCP |
| Channel 6 | 1432 - 1448 MHz DAS2 USB RCP |
| Channel 7 | 1416 - 1432 MHz DAS2 USB LCP |
| Channel 8 | 1432 - 1448 MHz DAS2 USB LCP |
| Bandwidth | 16 MHz |
| Recorder | Disk |
| DAS Mode | vsop.pro |
Ftp: ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06/vt06a1
Comments:
Connect DAS(s) directly to VSIC
ATCA, Mopra and Parkes will use Huygens cable (512 Mbps) - header with clock pins plugged into DAS1 Hobart will record only channels 1-4 (256 Mbps)
ATCA and Mopra schedules are available on the machines at the telescopes. Parkes schedule available at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06a/vt06a1/. Hobart using vex file, also available at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06a/vt06a1/
Parkes: Form circular polarisations from linears using hardware hybrid
ATCA, PKS, Mopra: Record to first Xraid partition (eg /export/xraid0/vt06a1/)
Record with command vsib_record -t 3h -s 2005-11-03T22:00:00 -m 2 -o vt06a1_<antenna>, where <antenna> = At,Mp,Pk
Hobart: record to internal 4×400 array (vt06a1/)
Record with command vsib_record -t 3h -s 2005-11-03T22:00:00 -o vt06a1_Ho
