Differences

This shows you the differences between two versions of the page.

--- lbaops:lbanov2005:vt06a1 [2005/10/20 16:15]
stingay
+++ lbaops:lbanov2005:vt06a1 [2005/10/21 13:03]
stingay
@@ Line 1: / Line 1: @@
-===== vt06a1 Setup:\\\\ =====
+===== vt06a1 Setup:\ =====
-^Antennas           | At-Mp-Pa-Ho |\\\\
+^Antennas           | At-Mp-Pa-Ho |\
-^Start              | 307 22:00:00   |\\\\
+^Start              | 307 22:00:00   |\
-^Stop               | 308 01:00:00   |\\\\
+^Stop               | 308 01:00:00   |\
-^PI                 | Adam Deller |\\\\
+^PI                 | Adam Deller |\
-^Channel 1          | 1384 - 1400 MHz DAS1 USB RCP  |\\\\
+^Channel 1          | 1384 - 1400 MHz DAS1 USB RCP  |\
-^Channel 2          | 1400 - 1416 MHz DAS1 USB RCP  |\\\\
+^Channel 2          | 1400 - 1416 MHz DAS1 USB RCP  |\
-^Channel 3          | 1384 - 1400 MHz DAS1 USB LCP  |\\\\
+^Channel 3          | 1384 - 1400 MHz DAS1 USB LCP  |\
-^Channel 4          | 1400 - 1416 MHz DAS1 USB LCP  |\\\\
+^Channel 4          | 1400 - 1416 MHz DAS1 USB LCP  |\
-^Channel 5          | 1416 - 1432 MHz DAS2 USB RCP  |\\\\
+^Channel 5          | 1416 - 1432 MHz DAS2 USB RCP  |\
-^Channel 6          | 1432 - 1448 MHz DAS2 USB RCP  |\\\\
+^Channel 6          | 1432 - 1448 MHz DAS2 USB RCP  |\
-^Channel 7          | 1416 - 1432 MHz DAS2 USB LCP  |\\\\
+^Channel 7          | 1416 - 1432 MHz DAS2 USB LCP  |\
-^Channel 8          | 1432 - 1448 MHz DAS2 USB LCP  |\\\\
+^Channel 8          | 1432 - 1448 MHz DAS2 USB LCP  |\
-^Bandwidth          | 16 MHz         |\\\\
+^Bandwidth          | 16 MHz         |\
-^Recorder           | Disk             |\\\\
+^Recorder           | Disk             |\
-^DAS Mode           | [[http://www.atnf.csiro.au/vlbi/dasmodes/16-2IF-1p-a.html|vsop.pro]] |\\\\
+^DAS Mode           | [[http://www.atnf.csiro.au/vlbi/dasmodes/16-2IF-1p-a.html|vsop.pro]] |\
-\\\\
-Ftp: [[ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06/vt06a1]]\\\\
-----\\\\
-\\\\
-===== Comments:\\\\ =====
-Connect DAS(s) directly to VSIC\\\\
-\\\\
-ATCA, Mopra and Parkes will use Huygens cable (512 Mbps) - header with clock pins plugged into DAS1\\\\
-Hobart will record only channels 1-4 (256 Mbps)\\\\
-\\\\
-ATCA and Mopra schedules are available on the machines at the telescopes.  Parkes schedule available at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06a/vt06a1/.  Hobart using vex file, also available at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06a/vt06a1/\\\\
-\\\\
-Parkes: Form circular polarisations from linears using hardware hybrid\\\\
-\\\\
-ATCA, PKS, Mopra: Record to Xraid partition xxx - Hobart: record to yyy\
 \
-Record with command vsib_record -t 3h -s 2005-11-03T22:00:00 -o vt06a1_<antenna>, where <antenna> = At,Mp,Pk,Ho
+Ftp: [[ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06/vt06a1]]\
+----\
+\
+===== Comments:\ =====
+Connect DAS(s) directly to VSIC\
+\
+ATCA, Mopra and Parkes will use Huygens cable (512 Mbps) - header with clock pins plugged into DAS1\
+Hobart will record only channels 1-4 (256 Mbps)\
+\
+ATCA and Mopra schedules are available on the machines at the telescopes.  Parkes schedule available at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06a/vt06a1/.  Hobart using vex file, also available at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06a/vt06a1/\
+\
+Parkes: Form circular polarisations from linears using hardware hybrid\
+\
+ATCA, PKS, Mopra: Record to first Xraid partition (eg /export/xraid0/vt06a1/) - Hobart: record to internal 4x400 array (vt06a1/)\
+\
+Record with command vsib_record -t 3h -s 2005-11-03T22:00:00 -m 2 -o vt06a1_<antenna>, where <antenna> = At,Mp,Pk,Ho

ATNF VLBI Wiki

User Tools

Site Tools

Differences

Page Tools