User Tools

Site Tools


lbaops:lbanov2005:vt06a1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lbaops:lbanov2005:vt06a1 [2005/10/21 12:10]
stingay
lbaops:lbanov2005:vt06a1 [2015/12/18 16:38] (current)
Line 1: Line 1:
-===== vt06a1 Setup:\\\ =====+===== vt06a1 Setup: ===== 
 + 
 +^Antennas           | At-Mp-Pa-Ho | 
 +^Start              | 307 22:00:00   | 
 +^Stop               | 308 01:00:00   | 
 +^PI                 | Adam Deller | 
 +^Channel 1          | 1384 - 1400 MHz DAS1 USB RCP  | 
 +^Channel 2          | 1400 - 1416 MHz DAS1 USB RCP  | 
 +^Channel 3          | 1384 - 1400 MHz DAS1 USB LCP  | 
 +^Channel 4          | 1400 - 1416 MHz DAS1 USB LCP  | 
 +^Channel 5          | 1416 - 1432 MHz DAS2 USB RCP  | 
 +^Channel 6          | 1432 - 1448 MHz DAS2 USB RCP  | 
 +^Channel 7          | 1416 - 1432 MHz DAS2 USB LCP  | 
 +^Channel 8          | 1432 - 1448 MHz DAS2 USB LCP  | 
 +^Bandwidth          | 16 MHz         | 
 +^Recorder           | Disk             | 
 +^DAS Mode           | [[http://www.atnf.csiro.au/vlbi/dasmodes/16-2IF-1p-a.html|vsop.pro]] | 
 + 
 +Ftp: [[ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06/vt06a1]] 
 +---- 
 + 
 +===== Comments: ===== 
 +Connect DAS(s) directly to VSIC 
 + 
 +ATCA, Mopra and Parkes will use Huygens cable (512 Mbps) - header with clock pins plugged into DAS1 
 +Hobart will record only channels 1-4 (256 Mbps) 
 + 
 +ATCA and Mopra schedules are available on the machines at the telescopes.  Parkes schedule available at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06a/vt06a1/ Hobart using vex file, also available at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06a/vt06a1/ 
 + 
 +Parkes: Form circular polarisations from linears using hardware hybrid 
 + 
 +ATCA, PKS, Mopra: Record to first Xraid partition (eg /export/xraid0/vt06a1/
 + 
 +Record with command vsib_record -t 3h -s 2005-11-03T22:00:00 -m 2 -o vt06a1_<antenna>, where <antenna> = At,Mp,Pk 
 + 
 +Hobart: record to internal 4x400 array (vt06a1/) 
 + 
 +Record with command vsib_record -t 3h -s 2005-11-03T22:00:00 -o vt06a1_Ho
  
-^Antennas           | At-Mp-Pa-Ho |\\\ 
-^Start              | 307 22:00:00   |\\\ 
-^Stop               | 308 01:00:00   |\\\ 
-^PI                 | Adam Deller |\\\ 
-^Channel 1          | 1384 - 1400 MHz DAS1 USB RCP  |\\\ 
-^Channel 2          | 1400 - 1416 MHz DAS1 USB RCP  |\\\ 
-^Channel 3          | 1384 - 1400 MHz DAS1 USB LCP  |\\\ 
-^Channel 4          | 1400 - 1416 MHz DAS1 USB LCP  |\\\ 
-^Channel 5          | 1416 - 1432 MHz DAS2 USB RCP  |\\\ 
-^Channel 6          | 1432 - 1448 MHz DAS2 USB RCP  |\\\ 
-^Channel 7          | 1416 - 1432 MHz DAS2 USB LCP  |\\\ 
-^Channel 8          | 1432 - 1448 MHz DAS2 USB LCP  |\\\ 
-^Bandwidth          | 16 MHz         |\\\ 
-^Recorder           | Disk             |\\\ 
-^DAS Mode           | [[http://www.atnf.csiro.au/vlbi/dasmodes/16-2IF-1p-a.html|vsop.pro]] |\\\ 
-\\\ 
-Ftp: [[ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06/vt06a1]]\\\ 
-----\\\ 
-\\\ 
-===== Comments:\\\ ===== 
-Connect DAS(s) directly to VSIC\\\ 
-\\\ 
-ATCA, Mopra and Parkes will use Huygens cable (512 Mbps) - header with clock pins plugged into DAS1\\\ 
-Hobart will record only channels 1-4 (256 Mbps)\\\ 
-\\\ 
-ATCA and Mopra schedules are available on the machines at the telescopes.  Parkes schedule available at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06a/vt06a1/ Hobart using vex file, also available at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06a/vt06a1/\\\ 
-\\\ 
-Parkes: Form circular polarisations from linears using hardware hybrid\\\ 
-\\\ 
-ATCA, PKS, Mopra: Record to Xraid partition /export/xraid0/vt06a1/ - Hobart: record to internal 4x400 array (vt06a1/)\ 
-\ 
-Record with command vsib_record -t 3h -s 2005-11-03T22:00:00 -o vt06a1_<antenna>, where <antenna> = At,Mp,Pk,Ho 
lbaops/lbanov2005/vt06a1.1129860643.txt.gz · Last modified: 2015/12/18 16:38 (external edit)