User Tools

Site Tools


lbaops:lbanov2005:vt06a1

This is an old revision of the document!


vt06a1 Setup:\\

Antennas At-Mp-Pa-Ho
Start 307 22:00:00
Stop 308 01:00:00
PI Adam Deller
Channel 1 1384 - 1400 MHz DAS1 USB RCP
Channel 2 1400 - 1416 MHz DAS1 USB RCP
Channel 3 1384 - 1400 MHz DAS1 USB LCP
Channel 4 1400 - 1416 MHz DAS1 USB LCP
Channel 5 1416 - 1432 MHz DAS2 USB RCP
Channel 6 1432 - 1448 MHz DAS2 USB RCP
Channel 7 1416 - 1432 MHz DAS2 USB LCP
Channel 8 1432 - 1448 MHz DAS2 USB LCP
Bandwidth 16 MHz
Recorder Disk
DAS Mode vsop.pro


Ftp: ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06/vt06a1
—-

Comments:\\

Connect DAS(s) directly to VSIC

ATCA, Mopra and Parkes will use Huygens cable (512 Mbps) - header with clock pins plugged into DAS1
Hobart will record only channels 1-4 (256 Mbps)

ATCA and Mopra schedules are available on the machines at the telescopes. Parkes schedule available at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06a/vt06a1/. Hobart using vex file, also available at ftp://ftp.atnf.csiro.au/pub/people/vlbi/vt06a/vt06a1/

Parkes: Form circular polarisations from linears using hardware hybrid

ATCA, PKS, Mopra: Record to first Xraid partition (eg /export/xraid0/vt06a1/) - Hobart: record to internal 4×400 array (vt06a1/)

Record with command vsib_record -t 3h -s 2005-11-03T22:00:00 -o vt06a1_<antenna>, where <antenna> = At,Mp,Pk,Ho

lbaops/lbanov2005/vt06a1.1129860687.txt.gz · Last modified: 2015/12/18 16:38 (external edit)