User Tools

Site Tools


lbaops:lbanov2007:vx012b

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
lbaops:lbanov2007:vx012b [2007/11/12 10:40]
chris.phillips
lbaops:lbanov2007:vx012b [2015/12/18 16:38] (current)
Line 1: Line 1:
-===== vx012b Setup:=====+===== vx012b Setup: =====
  
-^Description        | SETI VLBI on GL 581 Earth-like planet |\ +^Description        | SETI VLBI on GL 581 Earth-like planet | 
-^Antennas           | At-Mp-Pa |\ +^Antennas           | At-Mp-Pa | 
-^Start              | 316 21:00:00   |\ +^Start              | 316 21:00:00   | 
-^Stop               | 317 04:20:00   |\ +^Stop               | 317 04:20:00   | 
-^PI                 | Tingay |\ +^PI                 | Tingay | 
-^Channel 1          | '' DAS #1 IFP#1 RCP USB: SWITCH BETWEEN: 8093 - 8157, 8193 - 8257, 8293 - 8357, 8393 - 8457, 8493 - 8557 and 8543 - 8657 MHz '' |\ +^Channel 1          | '' DAS #1 IFP#1 RCP USB: SWITCH BETWEEN: 8093 - 8157, 8193 - 8257, 8293 - 8357, 8393 - 8457, 8493 - 8557 and 8543 - 8657 MHz ''
-^Channel 2          | '' DAS #1 IFP#2 LCP USB: SWITCH BETWEEN: 8093 - 8157, 8193 - 8257, 8293 - 8357, 8393 - 8457, 8493 - 8557 and 8543 - 8657 MHz '' |\ +^Channel 2          | '' DAS #1 IFP#2 LCP USB: SWITCH BETWEEN: 8093 - 8157, 8193 - 8257, 8293 - 8357, 8393 - 8457, 8493 - 8557 and 8543 - 8657 MHz ''
-^Channel 3          | '' DAS #2 IFP#1 RCP USB: SWITCH BETWEEN: 8143 - 8207, 8243 - 8307, 8343 - 8407, 8443 - 8507, 8543 - 8607 and 8643 - 8707 MHz '' |\ +^Channel 3          | '' DAS #2 IFP#1 RCP USB: SWITCH BETWEEN: 8143 - 8207, 8243 - 8307, 8343 - 8407, 8443 - 8507, 8543 - 8607 and 8643 - 8707 MHz ''
-^Channel 4          | '' DAS #2 IFP#2 LSB USB: SWITCH BETWEEN: 8143 - 8207, 8243 - 8307, 8343 - 8407, 8443 - 8507, 8543 - 8607 and 8643 - 8707 MHz '' |\ +^Channel 4          | '' DAS #2 IFP#2 LSB USB: SWITCH BETWEEN: 8143 - 8207, 8243 - 8307, 8343 - 8407, 8443 - 8507, 8543 - 8607 and 8643 - 8707 MHz ''
-^DAS 1 Skyfreq       | SWITCH BETWEEN: 8125, 8225, 8325, 8425, 8525 and 8625 MHz |\ +^DAS 1 Skyfreq       | SWITCH BETWEEN: 8125, 8225, 8325, 8425, 8525 and 8625 MHz | 
-^DAS 2 Skyfreq       | SWITCH BETWEEN: 8175, 8275, 8375, 8475, 8575 and 8675 MHz |\ +^DAS 2 Skyfreq       | SWITCH BETWEEN: 8175, 8275, 8375, 8475, 8575 and 8675 MHz | 
-^Bandwidth          | 64 MHz         |\ +^Bandwidth          | 64 MHz         | 
-^DAS Mode           | 64 MHz.pro |+^DAS Mode           | 64 MHz.pro |
-+
-Ftp: [[ftp://ftp.atnf.csiro.au/pub/people/vlbi/vx012/vx012b]]\ +
-----\ +
-+
-===== Comments:\ ===== +
-+
-This is in essence the same experiment as vx012a, but over a larger frequency range, at a higher frequency.\ +
-+
-This experiment is set up to switch between six frequency setups, as listed in the table above. These setups cover a 600 MHz frequency range from 8.1 GHz to 8.7 GHz.\ +
-+
-Frequency switch information for Parkes will be provided by Chris Phillips.  Frequency switch information for ATCA and Mopra is contained in the observing schedules.\ +
-+
-Connect VSIC directly to DAS, using the "BG3" cables for 1 Gbps recording.\ +
-+
-See comments for individual antennas below.\ +
-+
-===== Observing comments for each antenna:\ =====+
  
-| [[.:vx012batlog | At]] | [[.:vx012bmplog | Mp]] | [[.:vx012bpalog | Pa]] |\ +Ftp: [[ftp://ftp.atnf.csiro.au/pub/people/vlbi/vx012/vx012b]] 
-----\ +---- 
-===== Observing Logs===== + 
-[[http://www.atnf.csiro.au/cgi-bin/vlbi/parkes-onsource.pl?session=Nov2007&start=316/21:00:00&end=317/04:20:00| Parkes onsource flagging]]\\\ +===== Comments: ===== 
-[[http://www.atnf.csiro.au/cgi-bin/vlbi/mopra_onsource.pl?exper=vx012b| Mopra onsource flagging]]\+ 
 +This is in essence the same experiment as vx012a, but over a larger frequency range, at a higher frequency. 
 + 
 +This experiment is set up to switch between six frequency setups, as listed in the table above. These setups cover a 600 MHz frequency range from 8.1 GHz to 8.7 GHz. 
 + 
 +Frequency switch information for Parkes will be provided by Chris Phillips.  Frequency switch information for ATCA and Mopra is contained in the observing schedules. 
 + 
 +Connect VSIC directly to DAS, using the "BG3" cables for 1 Gbps recording. 
 + 
 +**ATCA:** See comments for individual antennas below. 
 + 
 +===== Observing comments for each antenna: ===== 
 + 
 +| [[.:vx012batlog | At]] | [[.:vx012bmplog | Mp]] | [[.:vx012bpalog | Pa]] | 
 +---- 
 +===== Observing Logs ===== 
 +[[http://www.atnf.csiro.au/cgi-bin/vlbi/parkes-onsource.pl?session=Nov2007&start=316/21:00:00&end=317/04:20:00| Parkes onsource flagging]]\\ 
 +[[http://www.atnf.csiro.au/cgi-bin/vlbi/mopra_onsource.pl?exper=vx012b| Mopra onsource flagging]]
  
  
lbaops/lbanov2007/vx012b.1194824407.txt.gz · Last modified: 2015/12/18 16:38 (external edit)