This is an old revision of the document!
Mopra VLBI observing is run from a VNC session on bigrock:1. Note that the VNC session is only accessible from within the ATNF network or via VPN or ssh port forwarding. If you cannot connect your VNC client to this host, check the VNC session is running on screen :1. To do this log onto bigrock using the normal observer username and pasword and run
> ps aux | grep -i vnc
The output should be something like the following. You are need to check a VNC server (such as Xtightvnc) is running on screen :1. The output should be something like:
Xtightvnc :1 -desktop X -auth /home/atcaobs/.Xauthority -geometry 1600×1000 -depth 24 -rfbwait 120000 -rfbauth /home/atcaobs/.vnc/passwd -rfbport 5901 -fp /usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/share/fonts/X11/misc/,/usr/share/fonts/X11/Type1/,/usr/share/fonts/X11/75dpi/,/usr/share/fonts/X11/100dpi/ -co /etc/X11/rgb -alwaysshared
If VNC is not active then run (this is an alias)
Check it returns something like the following and has started on screen :1.
New 'X' desktop is bigrock:1
You should now be able to connect your VNC client to the server.
You should run the following applications. Note to get an xterm on mpvsi1 or mpvsi2, Use the
Observing menu at the top right. To get an xterm on bigrock, click the “Terminal” icon to the left of the Observing menu.
The first desktop is for main observing. Run the following windows:
Recorder and DAS control
Start MoniCA from the observing menu (select Mopra!). Startup the following monitoring windows via the menu