User Tools

Site Tools


This is an old revision of the document!

Observatory Setup

At each observatory you need to run the program. This connects to the correlator processors at Parkes and copies the requested data down the network. should be run remotely by who ever is running the fringe test, as they sometimes hang and have to be restarted. This should be run after the correlator processes are started. Once you have logged onto the recorder PCs, you need to cd to the directory where the data is being recorded then run If the recorder is currently been run via cdisko or other programs which use “recorder_server”, then an alias “recdir” is setup which will automatically change to the correct directory. Usage will normally be something like:


On Mark5 systems you will have to “cd” to whatever directory the Mark5 is dumping the data.

If disk recording is moved to a different directory, will have to be stopped and restarted in this new directory.

Logging Onto Observatories

The recorders are running on the following machines and usernames. Note if remote recording is being run, you need to log onto the machine where the data is being written to disk NOT the machine where the data is received from the telescope. You can only connect via ssh.

Observatory Host Username Path
Parkes vlbi
Parkes vlbi /data
ATCA vlbi
Mopra vlbi
Hobart vlbi /mnt/flexbuf_0/fringtest
Ceduna flexbuffcd ## observer
Tid vlbi
ASKAP vlbiobs

##Log onto hovsi first then use rtfc-tunnel to ssh with appropriate tunnels setup

Note that at Parkes we also record data onto pam-store-ext. In such cases you need to run on the machine where the data is being recorded - see the note below.

Easy startup

The script rtfc_obswin.csh will start up 6 xterms and log into the recorder PCs. If you have ssh passphrases setup, you will not need passwords.

Environment settings

The following environment variables need to be set (or added to existing paths)

PERL5LIB /home/vlbi/evlbi/RtFC
PATH /home/vlbi/evlbi/RtFC
RTFC_CONTROL Optional, defaults to localhost
RTFC_CORRELATOR Optional, defaults to localhost
RTFC_ANTID E.g. 'At', defaults to 'Tt'
RTFC_ANTNAME 'ATCA Phased array', defaults to 'Test Antenna'

Remote recording

If you are recording to a remote recorder you need to ensure RTFC_ANTID (and RTFC_ANTNAME) are set. For remote recorders which generally only record data from a single teleacope this will normally be setup in the login scripts. cave-store can record data from Mopra and ATCA. Aliases have been setup “mopra” and “atca” to setup the environment. E.g.: → > atca>

Inverted Spectrum

Normally if the telescope IF spectrum is inverted, a flipped DAS profile should be used. However for 64 MHz recording the spectrum cannot be “flipped”. If you know or suspect the band is inverted you can run with the “-invert” option and it will flip the data for you.

> -invert

Mark5b supports Mark5B recording, as long as the “mark5access library and utilities are installed and accessible. Note this depends on the VLBI schedule having had explicit fringe test times added. Transfer times from Hartebeesthoek are terrible slow - usually it is faster to transfer the file by some other means then run on a local machine.

lbaops/rtfcobs.1567916634.txt.gz · Last modified: 2019/09/08 14:23 by chrisphillips