User Tools

Site Tools


lbaops:rtfcobs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
lbaops:rtfcobs [2019/09/29 11:00]
chrisphillips [Logging Onto Observatories]
lbaops:rtfcobs [2019/09/29 11:01] (current)
chrisphillips [Logging Onto Observatories]
Line 50: Line 50:
 Manual mounting of data via vbs_fs utility is required, Then you can fringe test any time range you need Manual mounting of data via vbs_fs utility is required, Then you can fringe test any time range you need
  
-#4# +The following can be done until RtFC supports this automatically. Note this needs to be redone very time you want newer data than was selected earlier (ie the links etc are static).
- +
-Katherine DBBC3 is not supported by Sched. You will need to manually create vexfile to match setup. Note there are usually multiple independent streams of data.  Usually it will be 2 streams, one for each pol. The bandwidth will probably not match other stations - e.g. probably 32 MHz channels. Also There is currently easy way to select which pol RtFC chooses. ​The following can be done until RtFC supports this automatically. Note this needs to be redone very time you want newer data than was selected earlier (ie the links etc are static).+
  
   fusermount ​ -u /​mnt/​vbsRFTC ​  # May not be required if first   fusermount ​ -u /​mnt/​vbsRFTC ​  # May not be required if first
Line 60: Line 58:
   ln -s /​mnt/​vbsRTFC/​* .        # Or (e.g.) ls -s /​mnt/​vbsRTFC/​v255*   ln -s /​mnt/​vbsRTFC/​* .        # Or (e.g.) ls -s /​mnt/​vbsRTFC/​v255*
   obs.pl -nofilter   obs.pl -nofilter
 +
 +#4#
 +
 +Katherine DBBC3 is not supported by Sched. You will need to manually create vexfile to match setup. Note there are usually multiple independent streams of data.  Usually it will be 2 streams, one for each pol. The bandwidth will probably not match other stations - e.g. probably 32 MHz channels. Also There is currently easy way to select which pol RtFC chooses. ​
  
 Note that at Parkes we also record data onto pam-store-ext. In such cases you need to run ''​obs.pl''​ on the machine where the data is being recorded - see the note below. Note that at Parkes we also record data onto pam-store-ext. In such cases you need to run ''​obs.pl''​ on the machine where the data is being recorded - see the note below.
lbaops/rtfcobs.txt · Last modified: 2019/09/29 11:01 by chrisphillips