Sidebar
lbaops:xraidmonitoring
Seting up an Xraid for a direct connection to PC or laptop
- Connect the PC/laptop network port directly to one of the Xraid network ports by a standard Cat5e cable. A cross-over cable is Not needed.
- Set a static network address on your PC/laptop to
| Address | 169.254.0.10 |
| Netmask | 255.255.0.0 |
| Network | 169.254.0.0 |
| Broadcast | 169.254.255.255 |
* To discover the network address of the Xraid run
=⇒> ping -b 169.254.255.255
you should get an return from the Xraid IP
- Raid the Apple RAID Admin Tool and enter this IP address as the destination host
- If you want to do this more than once, set a static IP address on the RAID admin, e.g.
| Address Xraid | 192.168.1.50 |
| Address PC | 192.168.1.10 |
| Netmask | 255.255.255.0 |
| Network | 192.168.1.0 |
| Broadcast | 192.168.1.255 |
then update the client host in RAID Admin Tool to point to 192.168.1.50
lbaops/xraidmonitoring.txt · Last modified: 2015/12/18 16:39 by 127.0.0.1
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
