Part 1
https://www.atnf.csiro.au/cgi-bin/vlbi/atca_summary.pl?start=125/02:45:00&end=125/06:00:00&year=2021&site=ATCA
Array = 750D
W100 W102 W128 W140 W147 W392
Refant: CA00
RefAntCal: CA03
Tied IF#1:
125/02:45:00-125/05:10:04 12345- 125/05:10:04-125/06:00:00 -2345-
Tied IF#2:
125/02:45:00-125/02:49:03 12345- 125/02:49:03-125/05:10:04 12---- 125/05:10:04-125/06:00:00 -2----
DOY 124
02:46:30 DSS43 transmitter started at at 20kW
Jamie “it says I changed at 02:49:03, so you are asking about the transition where I remove CA01 from the tied array at 05:10:04
that is because CA01 was being shadowed by CA02, because they are only 30m apart in this configuration
8:37 AM
that's why I had DAS2 as two antennas, they are so close together that phase differences between them are very unlikely”
06:00:00 ATCA stopped recording
Part 2
https://www.atnf.csiro.au/cgi-bin/vlbi/atca_summary.pl?start=125/21:10:00&end=126/00:00:00&year=2021&site=ATCA
Array = 750D
W100 W102 W128 W140 W147 W392
Refant: CA00
RefAntCal: CA03
Tied IF#1:
125/21:10:00-125/21:12:52 -2345- 125/21:12:52-125/22:39:02 1-345- 125/22:39:02-126/00:00:00 12345-
Tied IF#2:
125/21:10:00-125/21:12:52 -2---- 125/21:12:52-126/00:00:00 ----5-
21:12:00 ATCA started recording
DOY 125
00:00:00 ATCA stopped recording
