User Tools

Site Tools


southernhemisphereradar:observing_instructions

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
southernhemisphereradar:observing_instructions [2021/01/28 17:18]
chrisphillips
southernhemisphereradar:observing_instructions [2021/12/16 08:49]
chrisphillips [Realtime copyig of data]
Line 1: Line 1:
-====== ATCA Bi-statuic Radar Observing Instructions ======+====== ATCA Bi-static Radar Observing Instructions ======
  
 ==== Telescope ==== ==== Telescope ====
Line 10: Line 10:
   * Make sure the "8 bit" cable is connected between DAS "DigiOut" board and VSIC   * Make sure the "8 bit" cable is connected between DAS "DigiOut" board and VSIC
   * Set VSIC to mode **** (Huygens)   * Set VSIC to mode **** (Huygens)
-  * Configure DAS using ''msl_f.pro'' profile. This gives a 4 MHz band, offset from central ATCA IF frequency by XX MHz.+  * Configure DAS using ''msl_f.pro'' profile. This gives a 4 MHz band, offset from central ATCA IF frequency by -3 MHz.
  
 ==== Recording ===== ==== Recording =====
Line 21: Line 21:
  
    radarrecord -o EXTERIMENTNAME -t Xh    radarrecord -o EXTERIMENTNAME -t Xh
 +
 +==== Realtime copying of data ====
 +
 +`vsib_send` will send .lba data files when they are "complete", ie the end of 1 1 minute file in normal setup.
 +
 +On the recorder run (for example):
 +
 +   vsib_send -online -H cetus -p 11111
 +   
 +On the receiving machine (cetus in the example above)
 +
 +   vsib_recv -p 11111
 +   
 +The port numbers must match and be allowed through filewall
        
 ==== Realtime spectra ==== ==== Realtime spectra ====
Line 27: Line 41:
  
    fauto_ipp -n 80000 -sp1 45000 -sp2 55000 -t 60s -online -noplot -dump -command "scp %s kaputar:atca.spec"    fauto_ipp -n 80000 -sp1 45000 -sp2 55000 -t 60s -online -noplot -dump -command "scp %s kaputar:atca.spec"
-   +
 Create realtime spectra in ".rdr" format and copy to the ATNF ftp area (using `vsib_send`): Create realtime spectra in ".rdr" format and copy to the ATNF ftp area (using `vsib_send`):
  
-   fauto_ipp -n 4194304 -sp1 2516582 -sp2 2621440 -t 1s -online -dump -radar -command "vsib_send -p 33333 -H draco  %s" -noplot -lo 7159 +   fauto_ipp -n 4194304 -sp1 2516582 -sp2 2621440 -t 1s -online -dump -radar -noplot -lo 7159 -command "vsib_send -p 33333 -H cetus %s"  
-    + 
-This requires a vsib_recv process running on "draco", on port 33333:+This requires a vsib_recv process running on "cetus", on port 33333:
  
    vsib_recv -p 33333    vsib_recv -p 33333
  
southernhemisphereradar/observing_instructions.txt · Last modified: 2021/12/16 15:40 by chrisphillips