Differences

This shows you the differences between two versions of the page.

--- southernhemisphereradar:observing_instructions [2021/01/28 18:41]
chrisphillips [Recording]
+++ southernhemisphereradar:observing_instructions [2021/12/16 08:49]
chrisphillips [DAS]
@@ Line 10: / Line 10: @@
   * Make sure the "8 bit" cable is connected between DAS "DigiOut" board and VSIC
   * Set VSIC to mode **** (Huygens)
-  * Configure DAS using ''msl_f.pro'' profile. This gives a 4 MHz band, offset from central ATCA IF frequency by XX MHz.
+  * Configure DAS using ''msl_f.pro'' profile. This gives a 4 MHz band, offset from central ATCA IF frequency by -3 MHz.
 ==== Recording =====
@@ Line 28: / Line 28: @@
 On the recorder run (for example):
-   vsib_send -online -H draco -p 11111
+   vsib_send -online -H cetus -p 11111
-On the receving machine (draco in the example above)
+On the receving machine (cetus in the example above)
    vsib_recv -p 11111
@@ Line 44: / Line 44: @@
 Create realtime spectra in ".rdr" format and copy to the ATNF ftp area (using `vsib_send`):
-   fauto_ipp -n 4194304 -sp1 2516582 -sp2 2621440 -t 1s -online -dump -radar -noplot -lo 7159 -command "vsib_send -p 33333 -H draco %s"
+   fauto_ipp -n 4194304 -sp1 2516582 -sp2 2621440 -t 1s -online -dump -radar -noplot -lo 7159 -command "vsib_send -p 33333 -H cetus %s"
-This requires a vsib_recv process running on "draco", on port 33333:
+This requires a vsib_recv process running on "cetus", on port 33333:
    vsib_recv -p 33333

ATNF VLBI Wiki