Re: Schedule for tomorrow
- Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]
From: Cormac Reynolds <cormac.reynolds_at_email.protected>
Date: Tue, 14 Jun 2016 10:36:51 +0800
hi Jamie,
I found an error in the setup. I've fixed and redistributed it. Please
make sure you have PI revision 7.0 and test that this version is o.k.
cheers,
Cormac.
On 13/06/16 19:30, Jamie McCallum wrote:
> Hi Cormac,
> I've just tried to drudg the vc311 schedule for Hobart and it's
> failing with these errors:
>
> oper_at_email.protected
> drudg_rdctl: Reading system control file /usr2/control/skedf.ctl
> $SCRATCH $PRINT $MISC drudg_rdctl: Error parsing line:
> dbbc_if_targets 40000 40000
> DRUDG: Experiment Preparation Drudge Work (NRV & JMGipson 2015Aug31)
> Version: 9.11.08
> Opening file vc311.vex for schedule vc311.vex
> VREAD01 -- Got a VEX file to read, VEX_rev = 1.5;.
> $EXPER
> $STATIONS
> $MODES
> Found mode: sess216.K1024lba
> VMOINP06 - Error getting $TRACKS information for mode sess216.K1024lba
> station At
> iret= -3 ierr= 1
> ERRORMSG01 -3 = not found
> ERRORMSG02 1 = S2 record mode
> VMOINP07 - Error getting $HEAD_POS and$PASS_ORDER information for
> modesess216.K1024lba station At
> iret= -3 ierr= 1
> ERRORMSG01 -3 = not found
> ERRORMSG02 1 = S2 group order
> VMOINP06 - Error getting $TRACKS information for mode sess216.K1024lba
> station Mp
> iret= -3 ierr= 1
> ERRORMSG01 -3 = not found
> ERRORMSG02 1 = S2 record mode
> VMOINP07 - Error getting $HEAD_POS and$PASS_ORDER information for
> modesess216.K1024lba station Mp
> iret= -3 ierr= 1
> ERRORMSG01 -3 = not found
> ERRORMSG02 1 = S2 group order
> VREAD02 - Error reading modes.
> $SOURCES
>
> Does DiFX parse this VEX file? If it's just drudg, I'm happy to run the
> fringe-check recordings of vc311 manually. The v530a experiment drudges
> correctly with no reported errors.
> Cheers,
> Jamie
>
>
> On 13/06/16 14:19, Cormac Reynolds wrote:
> > hi,
> >
> > the schedule for v530a and associated fringe check v311 are on the
> > wiki and have been distributed. At-Mp-Ho (+EVN) participating.
> >
> > Jon, I'm assuming the EVN will take care of your fringe check for this
> > one, but let me know if you need to join this (will require a change
> > of source for vc311).
> >
> > cheers,
> > Cormac.
> >
>
>
>
> University of Tasmania Electronic Communications Policy (December, 2014).
> This email is confidential, and is for the intended recipient only.
> Access, disclosure, copying, distribution, or reliance on any of it by
> anyone outside the intended recipient organisation is prohibited and may
> be a criminal offence. Please delete if obtained in error and email
> confirmation to the sender. The views expressed in this email are not
> necessarily the views of the University of Tasmania, unless clearly
> intended otherwise.
>
Received on 2016-06-14 12:37:07
Date: Tue, 14 Jun 2016 10:36:51 +0800
hi Jamie,
I found an error in the setup. I've fixed and redistributed it. Please
make sure you have PI revision 7.0 and test that this version is o.k.
cheers,
Cormac.
On 13/06/16 19:30, Jamie McCallum wrote:
> Hi Cormac,
> I've just tried to drudg the vc311 schedule for Hobart and it's
> failing with these errors:
>
> oper_at_email.protected
> drudg_rdctl: Reading system control file /usr2/control/skedf.ctl
> $SCRATCH $PRINT $MISC drudg_rdctl: Error parsing line:
> dbbc_if_targets 40000 40000
> DRUDG: Experiment Preparation Drudge Work (NRV & JMGipson 2015Aug31)
> Version: 9.11.08
> Opening file vc311.vex for schedule vc311.vex
> VREAD01 -- Got a VEX file to read, VEX_rev = 1.5;.
> $EXPER
> $STATIONS
> $MODES
> Found mode: sess216.K1024lba
> VMOINP06 - Error getting $TRACKS information for mode sess216.K1024lba
> station At
> iret= -3 ierr= 1
> ERRORMSG01 -3 = not found
> ERRORMSG02 1 = S2 record mode
> VMOINP07 - Error getting $HEAD_POS and$PASS_ORDER information for
> modesess216.K1024lba station At
> iret= -3 ierr= 1
> ERRORMSG01 -3 = not found
> ERRORMSG02 1 = S2 group order
> VMOINP06 - Error getting $TRACKS information for mode sess216.K1024lba
> station Mp
> iret= -3 ierr= 1
> ERRORMSG01 -3 = not found
> ERRORMSG02 1 = S2 record mode
> VMOINP07 - Error getting $HEAD_POS and$PASS_ORDER information for
> modesess216.K1024lba station Mp
> iret= -3 ierr= 1
> ERRORMSG01 -3 = not found
> ERRORMSG02 1 = S2 group order
> VREAD02 - Error reading modes.
> $SOURCES
>
> Does DiFX parse this VEX file? If it's just drudg, I'm happy to run the
> fringe-check recordings of vc311 manually. The v530a experiment drudges
> correctly with no reported errors.
> Cheers,
> Jamie
>
>
> On 13/06/16 14:19, Cormac Reynolds wrote:
> > hi,
> >
> > the schedule for v530a and associated fringe check v311 are on the
> > wiki and have been distributed. At-Mp-Ho (+EVN) participating.
> >
> > Jon, I'm assuming the EVN will take care of your fringe check for this
> > one, but let me know if you need to join this (will require a change
> > of source for vc311).
> >
> > cheers,
> > Cormac.
> >
>
>
>
> University of Tasmania Electronic Communications Policy (December, 2014).
> This email is confidential, and is for the intended recipient only.
> Access, disclosure, copying, distribution, or reliance on any of it by
> anyone outside the intended recipient organisation is prohibited and may
> be a criminal offence. Please delete if obtained in error and email
> confirmation to the sender. The views expressed in this email are not
> necessarily the views of the University of Tasmania, unless clearly
> intended otherwise.
>
Received on 2016-06-14 12:37:07